Al Waleed A/C Spare Parts Trading LLC · Export to Nigeria & Africa
SIGMA HVAC Parts Nigeria —
Tools, Cleaners & Accessories
SIGMA AC condenser cleaner · evaporator foam cleaner · Stop Leak + UV Dye · cordless pressure washer · manifold gauges · vacuum pumps · compressors · water condensers — the professional HVAC maintenance range for Nigeria’s AC service market.
+971 566 952 848 · +971 4 224 9512 · Al Rigga – Deira, Dubai, UAE
SIGMA Product Lines
Distributed Brand
Grade Tools & Chemicals
Shipment — All Products
Days to Lagos
Quote Turnaround
SIGMA HVAC Parts — The Professional Maintenance Brand for Nigeria’s AC Market
SIGMA is one of Al Waleed’s own-distributed HVAC brands — a range of professional-grade AC maintenance products, tools, and accessories built for the Gulf and African HVAC service market. In Nigeria, where AC systems run year-round in ambient temperatures that accelerate maintenance intervals well beyond what European or North American equivalents require, the tools and chemicals an HVAC contractor uses to maintain, clean, and diagnose AC systems are as important to the quality of their work as the spare parts they fit.
The SIGMA range covers the full maintenance cycle of a Nigerian AC system — from condenser cleaning chemicals that restore heat rejection efficiency, to leak detection products that identify refrigerant loss before it reaches compressor-damaging levels, to professional service tools including vacuum pumps, manifold gauges, and the SIGMA cordless pressure washer that has become one of the most popular AC cleaning tools for Nigerian rooftop unit service. Every SIGMA product stocked by Al Waleed is available for export to Nigeria from Jebel Ali — consolidatable in the same sea freight shipment as compressors, refrigerants, copper coils, and other HVAC spare parts.
Why Maintenance Products Matter as Much as Spare Parts in Nigeria
A blocked condenser coil in Lagos in August raises head pressure to compressor-damaging levels within weeks of neglect. A dirty evaporator coil in a Nigerian office building reduces cooling efficiency by 20–30%, increasing electricity and generator costs and causing occupant complaints. An undetected refrigerant leak slowly starves the compressor of oil return until it fails — a failure that looks like a compressor fault but was actually caused by a slow leak that a UV dye test would have identified months earlier. Nigerian HVAC contractors who supply SIGMA maintenance products alongside their repair work add recurring service revenue, protect their compressor installations from premature failure, and build the kind of maintenance relationship with clients that generates repeat business for years.
SIGMA Product Range — Available for Nigeria Export from Al Waleed Dubai
The following SIGMA products are stocked by Al Waleed and available for immediate export to Nigeria. All can be consolidated into a single sea freight or air freight shipment alongside other HVAC parts and refrigerants.
SIGMA AC Condenser Cleaner
Coil Cleaning Chemical · Ready to Use · Spray Application
The SIGMA AC condenser cleaner is a professional-grade coil cleaning chemical formulated to dissolve the dust, grease, and oxidation deposits that accumulate on outdoor condenser coils in Nigeria’s environment — particularly on rooftop units in Lagos, Abuja, and Kano where harmattan dust, urban pollution, and construction site particulate combine to block condenser fins rapidly. A blocked condenser coil increases head pressure, reduces cooling efficiency, and accelerates compressor wear. Regular condenser cleaning with SIGMA cleaner is one of the most cost-effective maintenance interventions a Nigerian AC technician can offer.
How it works: Spray directly onto the condenser fins, allow dwell time for the chemical to penetrate and loosen deposits, then rinse with water. Suitable for use with a low-pressure garden hose or a pressure washer. Non-acidic formulation safe for aluminium fins and copper coil connections.
Nigerian application: Rooftop split AC condenser service · annual and biannual AC maintenance contracts · commercial building HVAC portfolio maintenance
SIGMA Cordless Pressure Washer — SG-50
SG-50 · Battery Powered · Portable · AC & Split Unit Cleaning
The SIGMA SG-50 cordless pressure washer is one of the most practical AC cleaning tools for the Nigerian HVAC service market — and has become a popular import item for Nigerian contractors precisely because of the challenge of working with outdoor AC units on rooftops, upper floors, and locations where a mains water supply or electrical outlet for a conventional pressure washer is not accessible. The SG-50 runs on a rechargeable battery with a built-in water tank, allowing the technician to deliver a targeted water spray to both condenser and evaporator coils in locations where no external power or water connection is available.
Why Nigerian contractors favour the SG-50: Lagos and Abuja building rooftops frequently have no water tap or power outlet near the AC outdoor units. A cordless pressure washer that carries its own water supply eliminates the need to run long hose lines from a distant tap — saving setup time, reducing the risk of hose damage and slipping hazards on rooftop surfaces, and allowing a single technician to complete a condenser wash efficiently without an assistant to manage hose lines.
Applications: Rooftop and high-rise AC condenser cleaning · evaporator coil rinse · general AC unit exterior cleaning · commercial building AC portfolio maintenance
SIGMA AC Stop Leak + UV Dye
Leak Sealer · UV Fluorescent Dye · R22 & R410a Compatible
The SIGMA Stop Leak + UV Dye is a two-function product designed to address one of the most common and commercially damaging situations in Nigeria’s AC service market — the slow refrigerant leak that causes a system to progressively lose cooling performance over weeks or months. The product combines a chemical stop leak agent that seals micro-leaks in refrigerant circuits with a fluorescent UV dye that makes leak sites visible under UV light — allowing the technician to identify the exact location of a leak rather than simply recharging the system and hoping the problem resolves itself.
Why this matters in Nigeria: Refrigerant leaks in Nigerian AC systems are accelerated by NEPA’s power cycling — each power cut and restoration creates a thermal pressure shock that stresses brazed joints, valve seals, and Schrader valve cores. Systems that hold a charge for years in stable grid environments develop slow leaks in Nigeria’s cycling conditions. A Nigerian contractor who uses SIGMA Stop Leak + UV Dye on refrigerant top-up jobs stops the revolving door of repeat recharge calls and demonstrates a diagnostic capability that builds client confidence.
Compatible with: R22 systems · R410a systems · all standard split AC refrigerant circuits
SIGMA Manifold Gauge Sets
2-Way & 4-Way · R22 · R410a · R404a · With Charging Hoses
A properly calibrated manifold gauge set is the single most important diagnostic instrument in a Nigerian HVAC technician’s toolkit — and one of the most frequently abused. Manifold gauges are used to measure suction and discharge pressures during refrigerant charging, to diagnose compressor faults, to monitor system performance after a compressor replacement, and to identify restrictions, overcharge, undercharge, and refrigerant contamination. SIGMA manifold gauge sets are available in both 2-way and 4-way configurations, with hoses colour-coded for the relevant refrigerant, and calibrated pressure ranges appropriate for R22, R410a, and R404a systems.
Important for Nigerian technicians: Use the correct manifold gauge for the refrigerant type. An R22 manifold gauge has a pressure range that does not cover R410a operating pressures — using the wrong gauge risks inaccurate readings and, in the case of R410a, potential gauge damage. SIGMA R410a manifold gauges are rated for the higher operating pressures of HFC refrigerants.
SIGMA Vacuum Pumps — B72 & B92
B72 · 1200W · B92 · 1400W · Two-Stage · Deep Vacuum
SIGMA vacuum pumps are two-stage rotary vane pumps capable of achieving the deep vacuum levels required for correct AC system preparation before refrigerant charging. The SIGMA B72 (1200W) is the standard model for residential and light commercial AC work — capable of evacuating a typical split AC refrigerant circuit to below 500 microns, the level at which moisture is effectively removed from the system. The SIGMA B92 (1400W) is the higher-capacity model for larger commercial systems with bigger refrigerant circuit volumes that require a more powerful pump to achieve adequate vacuum within a reasonable timeframe.
Why a two-stage pump matters in Nigeria: Single-stage cheap vacuum pumps — widely sold in Nigerian markets — typically achieve only 1,500–5,000 microns — insufficient to remove moisture from a refrigerant circuit. The moisture left behind forms acid with the refrigerant over time, destroying compressor oil and winding insulation. A SIGMA two-stage pump achieving 500 microns or below is the minimum standard for any compressor replacement or full system service.
Vacuum pump motor replacement: Al Waleed also stocks the SIGMA 1200W and 1400W vacuum pump replacement motors for Nigerian technicians who repair pumps rather than replacing entire units — available in the same shipment as other HVAC parts.
SIGMA Compressors — Reciprocating Refrigeration
Reciprocating · R134a · R404a · Commercial Refrigeration
SIGMA also produces reciprocating compressors for commercial refrigeration applications — cold rooms, display cabinets, and commercial cooling systems running on R134a and R404a. SIGMA reciprocating compressors occupy a similar market position to the Invotech YH series in the AC segment — a competitively priced commercial-quality alternative for Nigerian refrigeration contractors who need a reliable compressor for commercial cold room service at a price point that works for their clients. Al Waleed stocks SIGMA compressors for Nigeria alongside the Danfoss FR and SC series.
Applications: Light commercial cold rooms · supermarket display cabinets · hotel kitchen refrigeration · commercial condensing units
SIGMA Water Condenser — LRC Series
LRC Series · Shell & Tube · Commercial Refrigeration
The SIGMA LRC series water-cooled condenser is a shell-and-tube heat exchanger for commercial refrigeration condensing units where water cooling is used in place of or alongside air cooling. Water-cooled condensers are specified in Nigerian commercial refrigeration systems where outdoor ambient temperatures are too high for air-cooled condensers to maintain acceptable head pressures — particularly in generator rooms, plant rooms, and enclosed commercial spaces without adequate outdoor airflow. The LRC series water condenser replaces the air-cooled condenser coil in these applications, using a water circuit to reject heat from the refrigerant.
Applications: Commercial refrigeration plant rooms · condensing units in enclosed spaces · high-ambient Nigerian commercial cold room installations
SIGMA Evaporator Foam Cleaner
No-Rinse Foam Formula · Indoor Unit Evaporator Coil
The SIGMA evaporator foam cleaner is a no-rinse foaming chemical for cleaning the indoor evaporator coil without removing the indoor unit from the wall. In Nigeria’s dusty environment, evaporator coils accumulate dust faster than in cleaner ambient conditions — reducing airflow across the coil, degrading cooling efficiency, and in severe cases causing the evaporator to ice up. The SIGMA foam cleaner is applied directly to the evaporator fins with the unit in place, foams to penetrate and lift dust and biological deposits, then drains via the condensate drain line — no rinse water required, no water damage risk to Nigerian wall finishes or electrical components.
Applications: Residential split AC indoor unit evaporator service · commercial cassette AC coil cleaning · annual maintenance contract servicing
SIGMA Products Quick Reference — Nigeria Application Guide
| SIGMA Product | Nigerian Application | When to Use | Demand Level |
|---|---|---|---|
| AC Condenser Cleaner | Split AC outdoor unit · all commercial AC | Every maintenance visit · before compressor replacement | Very High |
| SG-50 Cordless Pressure Washer | Rooftop and upper-floor condenser wash | Post-chemical clean rinse · no water access locations | High |
| Stop Leak + UV Dye | Slow refrigerant leak diagnosis and sealing | Refrigerant top-up jobs · repeat low-gas calls | High |
| Manifold Gauge Sets | Refrigerant charging · system diagnosis | Every compressor replacement · gas charge job | High |
| Vacuum Pump B72 (1200W) | Residential and light commercial AC service | Every compressor replacement · full system service | High |
| Vacuum Pump B92 (1400W) | Commercial AC and larger refrigeration systems | Commercial compressor replacement · VRF service | Medium |
| Evaporator Foam Cleaner | Split AC indoor unit evaporator coil | Annual maintenance · dusty environments | High |
| Compressors (Reciprocating) | Commercial cold rooms · display cabinets | Commercial refrigeration compressor replacement | Medium |
| Water Condenser LRC Series | Enclosed commercial refrigeration plant rooms | High-ambient installations without outdoor airflow | Specialist |
Building a SIGMA-Based Maintenance Revenue Stream in Nigeria
Nigerian HVAC contractors who supply only compressor and refrigerant replacement services leave a significant and recurring revenue opportunity on the table. The SIGMA product range enables a structured AC maintenance service that generates consistent repeat income alongside repair work — and the investment in SIGMA tools and chemicals pays back across hundreds of service visits.
Residential AC Maintenance Contract
A standard Nigerian residential AC maintenance visit using SIGMA products covers: evaporator coil foam clean (SIGMA evaporator cleaner), condenser coil chemical wash and rinse (SIGMA condenser cleaner + SG-50 pressure washer), refrigerant level check with manifold gauges, UV dye check for leaks if gas level is low, filter wash, and drain line flush. This service visit takes 45–90 minutes per unit and commands a service fee that more than covers the cost of the SIGMA consumables used. Contractors who offer maintenance contracts to residential clients in Lagos and Abuja benefit from predictable recurring income throughout the year — not just the peak fault-season rush.
Commercial Building HVAC Portfolio Service
Nigerian FM companies managing AC portfolios in banks, hotels, and office buildings typically require quarterly or biannual maintenance visits on each AC unit under contract. A contractor equipped with SIGMA tools — particularly the SG-50 cordless pressure washer for high-floor condenser cleaning and the SIGMA manifold gauge set for system health checks — can service large commercial AC portfolios efficiently, professionally, and to a standard that satisfies FM company service level requirements. This positions the contractor for long-term FM contracts rather than one-off repair call-outs.
Preventive Maintenance Before Peak Season
Nigeria’s peak AC demand season runs from approximately March to June — the hottest and most humid months before the rainy season brings some relief. Nigerian HVAC contractors who offer pre-season maintenance services (condenser cleaning, refrigerant check, capacitor replacement, fan motor inspection) in January and February prevent the compressor failures and emergency call-outs that occur when dirty, underserviced AC systems are pushed hard in peak heat. SIGMA maintenance products are the tools that make this preventive service commercially viable — and they significantly reduce the number of emergency compressor replacement jobs that consume contractor capacity during the busiest months.
SIGMA Products as Retail Stock for Nigerian Dealers
Nigerian HVAC spare parts dealers who supply contractors — particularly at Alaba International Market in Lagos and Wuse Market in Abuja — can stock SIGMA condenser cleaner, evaporator cleaner, and Stop Leak + UV Dye as retail items alongside their compressor and refrigerant business. These are consumables that contractors buy repeatedly, generating regular reorder traffic. The SIGMA brand’s visibility in the Gulf HVAC market gives Nigerian dealers a recognisable brand name to merchandise, rather than unbranded chemical products that are harder to position and price.
Frequently Asked Questions — SIGMA HVAC Parts for Nigeria
Is the SIGMA AC condenser cleaner safe for Nigerian AC units with aluminium fins?
Yes — the SIGMA AC condenser cleaner uses a non-acidic, alkaline-based formulation that is safe for standard aluminium fin and copper tube condenser coils used in Nigerian split AC outdoor units. Acid-based coil cleaners, which are sometimes sold in Nigerian markets, can corrode aluminium fins over time with repeated use. The SIGMA formula is designed for regular use in professional maintenance applications without damaging the aluminium fin material. Always rinse thoroughly after the chemical dwell time — the spent cleaning solution contains dissolved contaminants that should not remain on the coil surface after cleaning.
How long does the SIGMA SG-50 battery last on a single charge — and is it enough for a full service visit?
The SIGMA SG-50 is designed for field AC maintenance use — the battery capacity and water tank volume are sized for a typical single-unit outdoor condenser rinse. For a standard residential split AC condenser wash following a chemical pre-clean, a single battery charge and full water tank is generally sufficient to rinse one to two outdoor units. For a full commercial building service visit covering multiple units, the technician would need to recharge the battery and refill the water tank between units — both of which can be done at the ground-level service vehicle or on-site water point between floors. The cordless advantage is most valuable when the technician is working at height or in rooftop locations without water access — the SG-50 does not need to be carried all the way back to ground level for refills when working a multi-unit rooftop service.
Can SIGMA Stop Leak be used in R410a systems as well as R22?
Yes — the SIGMA Stop Leak + UV Dye is compatible with both R22 and R410a refrigerant systems. It is injected into the refrigerant circuit and circulates with the refrigerant, sealing micro-leaks at seals, valve cores, brazed joints, and connection points. The UV dye component remains in the system and can be detected at any future leak site using a UV torch — a standard diagnostic tool for refrigerant leak detection. Note that stop leak products seal micro-leaks and slow leaks — they are not a substitute for proper leak repair at large or accessible leak sites. For a significant leak at an identifiable joint or valve, the correct repair is to recover the refrigerant, repair or replace the leaking component, replace the filter drier, evacuate, and recharge.
Can I order SIGMA products alongside compressors and refrigerant in the same shipment from Al Waleed?
Yes — this is one of the key advantages of sourcing SIGMA products from Al Waleed alongside other HVAC parts. Compressors, refrigerant gas, copper coils, SIGMA tools, SIGMA cleaners, and other HVAC accessories can all be consolidated into a single sea freight shipment from Jebel Ali to Apapa or Onne Port on a single commercial invoice and packing list. This reduces per-unit shipping cost for all items, simplifies Nigerian customs clearance (single consignment rather than multiple), and ensures the contractor or dealer receives their full complement of tools, chemicals, and parts in a single delivery. WhatsApp our export desk with the full list of items you need — we package and price the complete order as a single shipment.
What is the correct vacuum level a Nigerian technician should achieve before charging a new compressor?
The target vacuum level before charging any AC or refrigeration system is 500 microns (0.5 millitorr) or below — achievable with the SIGMA B72 or B92 two-stage vacuum pump. After reaching 500 microns, isolate the system from the pump by closing the manifold gauge service valves and monitor the vacuum level for 15–30 minutes. If the vacuum rises above approximately 1,000 microns during the hold period, there is either a leak in the system or a significant moisture load that requires a second evacuation cycle. A stable vacuum below 500 microns after the hold period confirms the system is clean, tight, and ready to charge. This standard applies to every compressor replacement and full refrigerant service job — including the smallest residential Nigerian split AC unit.
Africa Export Desk — Open Mon–Sat 8AM to 10PM Dubai Time
Send your SIGMA product list — price and availability within 24 hours
SIGMA condenser cleaner · SG-50 pressure washer · stop leak · manifold gauges · vacuum pumps · compressors · all consolidatable with refrigerants and spare parts in one Dubai shipment to Nigeria
Related Products & Pages
- SIGMA AC Condenser Cleaner — coil cleaning chemical for Nigerian AC service
- SIGMA SG-50 Cordless Pressure Washer — battery-powered, portable, no mains water needed
- SIGMA Stop Leak + UV Dye — R22 and R410a compatible leak sealer and tracer
- SIGMA LRC Water Condenser — shell and tube for enclosed commercial installations
- SIGMA Vacuum Pumps — B72 (1200W) and B92 (1400W) two-stage for Nigeria
- SIGMA Manifold Gauge Sets — R22, R410a and R404a with charging hoses
- All SIGMA Cleaners — condenser cleaner, evaporator foam, coil treatments
- All SIGMA Products — complete range from Al Waleed Dubai
- HVAC Tools Nigeria — full tool range for Nigerian AC technicians
- HVAC Spare Parts Nigeria — capacitors, filter driers, PCB boards and more
- AC Compressors Nigeria — LG, Invotech, Danfoss, GMCC and WESTRON
- Refrigerant Gas Nigeria — WESTRON and MAXRON all grades
- Copper Coils and Pipe Fittings Nigeria
- Wholesale & Bulk Pricing for Nigerian Dealers
- How to Order & Ship from Dubai to Nigeria
- About Al Waleed — Dubai HVAC exporter since 2005
- HVAC Spare Parts Nigeria FAQ
Order SIGMA HVAC Parts for Nigeria from Dubai
SIGMA AC condenser cleaner · SG-50 cordless pressure washer · Stop Leak + UV Dye · manifold gauge sets · vacuum pumps · evaporator foam cleaner · compressors · water condensers — the complete SIGMA professional maintenance range for Nigeria’s HVAC service market. Consolidate with compressors, refrigerants, copper coils and HVAC spare parts in a single sea freight shipment from Jebel Ali to Lagos or Abuja. Send your product list via WhatsApp — confirmed price and availability within 24 hours.
+971 566 952 848 · +971 4 224 9512 · Al Rigga – Deira, Dubai, UAE · contact@alwaleedhvac.com