Al Waleed A/C Spare Parts Trading LLC · Export to Kenya & East Africa
Copper Coils Kenya —
NWM · Mueller · WESTRON® ACR Soft Coil
ASTM B280 ACR-grade soft copper coil rolls — bare and pre-insulated — 1/4 to 3/4 inch for all Kenya split AC line sets. NWM · Mueller · WESTRON® brands. Factory nitrogen-sealed. Pre-insulated copper mandatory for all Mombasa and coastal Kenya installations. Wholesale from Dubai to Mombasa Port.
+971 566 952 848 · +971 4 224 9512 · Al Rigga – Deira, Dubai, UAE
B280 ACR Grade
All AC Diameters
Standard Coil Roll
Nitrogen Sealed
Port · 18–22 Days
Quote Turnaround
Copper Coils Kenya — ACR Grade for Every Kenya Split AC Installation
Copper coil is consumed on every AC installation job in Kenya — every new residential split AC installation in a Nairobi apartment, every hotel room AC replacement on Mombasa’s coast, every office fit-out in Westlands, and every commercial AC installation across Kenya’s growing secondary cities all require ACR-grade copper coil to connect the indoor and outdoor units through the refrigerant line set. As Kenya’s AC market grows and new construction accelerates in Nairobi and Mombasa, copper coil is one of the most consistently consumed products in the Kenyan HVAC supply chain.
Al Waleed supplies NWM, Mueller, and WESTRON® ASTM B280 ACR-grade soft copper coil in 15-metre rolls across all standard HVAC diameters — from the 1/4-inch liquid line used on the smallest 0.75-ton residential AC through to the 3/4-inch suction line for 3-ton commercial units. Both bare copper and pre-insulated copper coil are available. Pre-insulated copper is not optional for Mombasa and coastal Kenya AC installations — it is the correct specification for every suction line installation where the ambient humidity exceeds 70%, which is year-round along Kenya’s entire coastal strip.
ACR Copper Coil vs Plumbing Copper — The Critical Distinction for Kenya AC Contractors
ACR copper coil (ASTM B280) is manufactured specifically for air conditioning and refrigeration applications. After annealing, the copper tube is cleaned, dried, dehydrated, and factory-sealed with dry nitrogen at both ends to prevent internal oxidation and moisture contamination before installation. Standard plumbing copper (ASTM B88 or similar) is manufactured for water service — it has not been cleaned and dried to the same standard and contains internal residual moisture, oil from the rolling process, and oxide scale that will contaminate the refrigerant circuit when used for AC line sets. Contamination from plumbing copper destroys compressor oil — typically within 3–6 months of installation. Kenyan AC contractors who use plumbing copper to save cost on line sets are creating a compressor damage liability that usually returns as a warranty callback within the first year. Al Waleed supplies only ASTM B280 ACR-grade copper coil to Kenya — the correct specification for every AC line set regardless of the brand being installed.
Copper Coil Brands — Which to Choose for Your Kenya Application
NWM Copper Coil Kenya
ASTM B280 · EN 12735 · 1/4 to 3/4 inch · 15m Rolls
NWM is Al Waleed’s primary copper brand for Kenya — covering all HVAC diameters in both bare and pre-insulated format, with ASTM B280 and EN 12735 compliance documentation. NWM provides the right balance of quality and price for volume contractor supply in both Nairobi and Mombasa markets. Best choice for dealers who supply a broad base of residential and commercial AC contractors across Kenya. Al Waleed is an authorised UAE dealer for NWM copper.
Available sizes: 1/4 · 3/8 · 1/2 · 5/8 · 3/4 inch bare and pre-insulated, 15m rolls
Mueller Copper Coil Kenya
ASTM B280 · US Origin · Project Submittals
Mueller (USA) is the copper brand specified for Nairobi international hotel projects, hospital M&E construction, UN facility fit-outs, embassy compound HVAC works, and commercial projects requiring US-origin ASTM documentation for material submittals. Kenya’s large international project sector — significantly larger per capita than most African markets due to the NGO and diplomatic presence — creates consistent Mueller demand from project-focused M&E contractors.
Available sizes: 1/4 · 3/8 · 1/2 · 5/8 · 3/4 inch, 15m rolls
WESTRON® Copper Coil Kenya
ACR Grade · 1/4–3/4 inch · Most Competitive
WESTRON® copper coil is the most price-competitive ACR-grade option for Kenyan dealers who prioritise cost efficiency in high-volume residential AC installation supply. For dealers who supply large residential estate developments in Nairobi — where hundreds of AC units may be installed in a single project — WESTRON® copper coil provides documented ACR quality at the best price per roll. Consolidate with WESTRON® refrigerant gas in the same shipment for maximum order efficiency.
Available sizes: 1/4 · 3/8 · 1/2 · 5/8 · 3/4 inch bare and pre-insulated, 15m rolls
Pre-Insulated Copper Coil Kenya — Mandatory for Mombasa and Coastal Installations
Why Pre-Insulated Matters on the Kenya Coast
A bare copper suction line running at 8–12°C through a room where the ambient humidity is 80% will condense moisture on its surface continuously whenever the AC is running. In Mombasa, Malindi, Kilifi, Diani, Watamu, Lamu, and all coastal Kenya properties, an uninsulated suction line delivers dripping condensate onto the wall, ceiling, or floor every time the system operates. Over months this saturates plaster, promotes mould, and corrodes any metal bracket in contact with the wet copper. Pre-insulated copper prevents this entirely.
13mm Wall Thickness — The Mombasa Standard
For Mombasa and all coastal Kenya AC installations, 13mm closed-cell foam wall thickness on the suction line insulation is the correct specification — not the thinner 9mm that is acceptable for Nairobi’s drier highland conditions. The 13mm wall provides the thermal resistance needed to keep the outer surface of the insulation sleeve above the dewpoint of coastal Kenya’s humid air, preventing surface condensation on the insulation itself. Al Waleed stocks both 9mm and 13mm pre-insulated copper coil for Kenya.
Bare Copper for Nairobi Inland
Nairobi’s 1,700-metre highland altitude produces much lower ambient humidity than the coast — typically 50–65% in the dry season — meaning suction line condensation is not a persistent problem in most Nairobi installations. Bare copper suction lines with field-applied 9mm foam sleeve at the wall entry point is an acceptable specification for most Nairobi residential and commercial AC installations. However, for Nairobi buildings with ground-floor outdoor units exposed to garden moisture, or basement-level plant rooms, pre-insulated copper remains the better choice.
AC Copper Coil Price Kenya — Dubai FOB Indicative Ranges 2026
| Size | Type | NWM Indicative FOB | Kenya Application |
|---|---|---|---|
| 1/4 inch | Bare ACR 15m | USD 18–28 | Liquid line all AC capacities |
| 3/8 inch | Bare ACR 15m | USD 24–36 | Suction line 0.75T · liquid line 1.5T–2T |
| 1/2 inch | Bare ACR 15m | USD 35–55 | Suction line 1T–1.5T — highest volume Kenya |
| 1/2 inch | Pre-insulated 9mm 15m | USD 42–62 | Nairobi suction line — estate installations |
| 1/2 inch | Pre-insulated 13mm 15m | USD 48–70 | Mombasa suction line — mandatory coastal spec |
| 5/8 inch | Bare ACR 15m | USD 50–72 | Suction line 2T–2.5T commercial AC Kenya |
| 3/4 inch | Bare ACR 15m | USD 65–90 | Suction line 3T commercial — Nairobi offices |
Copper prices track the LME copper price and change regularly. Prices above are NWM indicative Dubai FOB — landed cost in Kenya adds Mombasa sea freight, KRA import duties, and inland delivery. WhatsApp Al Waleed for confirmed current pricing.
Frequently Asked Questions — Copper Coil for Kenya AC
What is the ac copper coil price in Kenya from Dubai in 2026?
NWM ACR copper coil indicative Dubai FOB prices for early 2026: 1/4-inch 15m roll approximately USD 18–28, 1/2-inch 15m roll approximately USD 35–55, pre-insulated 1/2-inch 9mm approximately USD 42–62, pre-insulated 1/2-inch 13mm approximately USD 48–70. Copper prices change daily with the LME copper price — these figures are planning benchmarks only. The landed cost in Kenya adds Mombasa Port sea freight, KRA import duties, clearance fees, and inland delivery to your Nairobi or Mombasa warehouse. WhatsApp Al Waleed with your required sizes and quantities for a confirmed current price before planning your Kenya copper coil order.
Which copper coil sizes should a Kenyan AC installer stock as standard?
For a Kenyan AC contractor working primarily on residential split AC (the largest volume job type), the core stock position is 1/4-inch bare copper for liquid lines and 1/2-inch for suction lines — both the highest-volume sizes for standard 1-ton and 1.5-ton Kenya residential AC. For Mombasa-based or coastal Kenya contractors, stock pre-insulated 1/2-inch 13mm for suction lines as the primary product rather than bare copper. For contractors who also work on 2-ton and commercial AC, add 3/8-inch and 5/8-inch to the stock range. A Nairobi dealer serving a mixed contractor base should carry 1/4, 3/8, 1/2, and 5/8-inch in both bare and 9mm pre-insulated as the comprehensive residential and commercial stock position.
Can copper coil rolls be shipped alongside refrigerant and compressors to Mombasa Port?
Yes — and consolidating copper coil with compressors and refrigerant in the same sea freight shipment from Jebel Ali to Mombasa Port is the most cost-effective Kenya import approach. Copper coil rolls in 15m coils are dense, heavy products that fill available shipment weight allocation efficiently — adding rolls of copper to a shipment that already carries compressors and refrigerant cylinders increases the total shipment weight without significantly increasing the cubic volume, producing a lower per-unit freight cost for the copper. One shipment, one commercial invoice, one KRA customs entry — the Al Waleed Kenya consolidated approach.
Africa Export Desk — Open Mon–Sat 8AM to 10PM Dubai Time
Send sizes, brands and quantities — price within 24 hours
NWM · Mueller · WESTRON® ACR copper coil 1/4 to 3/4 inch · bare and pre-insulated 9mm and 13mm — sea freight to Mombasa Port · consolidate with compressors and refrigerant gas
Related Products & Pages
- Copper Pipe & Tube Kenya — full copper range including fittings and brazing rods
- Copper Condenser & Evaporator Coils Kenya
- Copper & Brass Fittings
- Silver Brazing Rods
- Insulation Foam Sleeve and Tape
- AC Compressors Wholesale Kenya
- Refrigerant Gas Wholesale Kenya
- Manifold Gauges & HVAC Tools Kenya
- Order & Shipping Dubai to Kenya
- About Al Waleed
Order Copper Coils for Kenya from Dubai
NWM · Mueller · WESTRON® ASTM B280 ACR-grade soft copper coil — 1/4 to 3/4 inch bare and pre-insulated — 15-metre rolls — factory nitrogen-sealed. 9mm pre-insulated for Nairobi highland installations. 13mm pre-insulated mandatory for Mombasa and all coastal Kenya AC. Consolidate with compressors and refrigerant gas in one sea freight shipment from Jebel Ali to Mombasa Port. Send sizes and quantities — confirmed price within 24 hours.
+971 566 952 848 · +971 4 224 9512 · contact@alwaleedhvac.com · Al Rigga – Deira, Dubai, UAE